Ask Proxima IN42 User's Guide Page 12
- Page / 49
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
11
Connecting a video device
Standard video connections
Plug the audio/video (A/V) cable’s yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 3 connector on the projector. Plug a white connector into the left
audio out connector on the video device and plug a red connector into the
right audio out connector on the video device. Plug the remaining white
connector into the left audio in connector on the projector, and plug the red
connector into the right audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 2 connector on the projector. Use the A/V cable’s
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).
If the video device uses component cable connectors (sold separately), plug
the cable’s green connectors into the green component-out connector on the
video device and into the Video 1 green component connector (labeled “Y”)
on the projector. Plug the component cable’s blue connectors into the blue
component-out connector on the video device and into the blue component
connector (labeled “Cb/Pb”) on the projector. Plug the component cable’s
red connectors into the red component-out connector on the video device
and into the red component connector (labeled “Cr/Pr”) on the projector.
Use the A/V cable’s audio connectors as described above (the yellow con-
nectors on the A/V cable are not used). NOTE: The component connectors
can be used for HDTV sources (480i, 480p, 720p, 576i and 1080i formats).
connect A/V cable
connect power cable
connect S-video and video cables
connect component cables
and video cables
EDX Ref Guide.fm Page 11 Friday, June 30, 2006 10:48 AM
- User’s Guide 1
- Battery Safety Information 2
- Trademarks 2
- 2’ / 0.6 m 4
- Introduction 5
- Connector Panel 6
- Positioning the projector 7
- Connecting a computer 8
- Displaying a computer image 10
- Adjusting the image 11
- Connecting a video device 12
- Displaying a video image 13
- Shutting down the projector 15
- Troubleshooting your setup 15
- Signal out of 17
- Temperature light 20
- Lamp light 20
- Still having problems? 21
- Using the keypad buttons 22
- Using the remote control 22
- Using the audio 23
- Optimizing computer images 24
- Presentation features 24
- Optimizing video images 25
- Customizing the projector 25
- Using the menus 26
- Picture menu 27
- Save Settings 28
- Advanced settings 29
- Settings menu 30
- Screen Save 31
- Startup Logo 31
- Capture New 31
- Blank Screen 31
- Custom Key 32
- Language 33
- Service menu 33
- Lens Type 33
- Service Info 33
- Maintenance 34
- Replacing the projection lamp 35
- Cleaning the dust filter 37
- Using the security lock 37
- Appendix 38
- (90%) to 1:1 (50%) 38
- RS-232 commands 41
Related products and manuals for Data projectors Ask Proxima IN42
(51 pages)
(50 pages)SCOTT SW M8 BK CURVE manuals
Owner’s manuals and user’s guides for CD players SCOTT SW M8 BK CURVE.
We providing 1 pdf manuals SCOTT SW M8 BK CURVE for download free by document types: Datasheet
Comments to this Manuals